MOSKIT TALKIT SALKIT CABKIT OREL UAL NVG PAPI TAC PAPI CHARGER
CABKIT Specification
Trailer Specification
 |
Dimensions (Nominal) |
|
| Height (overall-laden with doors closed) |
1800mm (71 inches) |
|
| Length (overall) |
3734mm (147 inches) |
|
| Width (overall) |
1644mm (65 inches) |
|
| Track |
1112mm (44inches) |
|
| |
|
| Weight (approx) |
1420kg (3130 lb) |
|
| |
|
| Vehicle Details |
|
| Nose load (approx. - with Trailer level) |
<100kg (221lb) |
|
| Wheel Rim |
Pressed steel, 5.5" x 14" |
|
| Tyre |
185 R14 C8PR |
|
| Tyre pressure |
4.5 bar (65 psi) |
|
| Brakes |
Drum, 250mm dia. x 40mm, Auto-reverse type |
|
| Wheel bearing end float adjustment |
0.15mm (0.006") MAXIMUM |
|
| Hitch (coupling) |
Hydraulically damped overrun mechanism. Fitted with 76mm NATO EYE as standard (others available), plus over-centre hand brake. |
|
| |
| Trailer Lighting: |
|
| Light fittings |
24V, rear light units (customer specified) |
|
| Inter-vehicle connector |
12 pin NATO type |
|
| |
| Torque Settings: |
|
| Wheel nuts |
50lb ft (67NM) |
|
| Hitch to 'A' Frame, fixings |
65lb ft (88NM) |
|
| Axle to spring clamp, fixings |
55lb ft (74NM) |
|
Suspension to Chassis, fixings
('Grease' bolt/nut) |
40lb ft (47 to 54NM) |
|
|
|
Junction Box Specification
|
Dimensions (overall, including connectors) |
|
| Height |
92mm (3.6 inches) |
|
| Length |
148mm (5.8 inches) |
|
| Width (excluding cable) |
115mm (4.5 inches) |
|
| Output cable length |
750mm (29.5 inches) |
|
| |
|
| Weight (approx) |
1.3 kg (2.8 lb) |
|
| |
|
| Input Power Supply |
|
| Voltage Range |
|
Diagnostic Mode |
30V Nominal |
|
Operational Mode |
208 to 240V Nominal, 50/60 Hz.
|
|
| Input Current (Typical) |
100 mA @ 240V |
|
| Output |
|
| Charger Mode |
0.9A max. @ 14.2V
(3 stage temperature compensated)
|
|
| Lamp Driver Mode |
14.1V |
|
| Status Indication |
Tri-colour LED (Light activated)
|
|
| Protection |
Short circuit,Transient surge and Over temperature.
|
|
|
|
Generator Specification
|
Dimensions |
|
| Height |
550mm (21.7 inches) |
|
| Width |
750mm (29.5 inches) |
|
| Depth |
406mm (16 inches) |
|
| |
|
| Weight (approx) |
63.6kg (140 lb) |
|
| |
|
| Fuel: |
Diesel
|
|
| Output: |
2kW, 240V ac @ 60Hz, 3 wire with centre Neutral grounded.
|
|
|
|
Field Cable Assembly Specification
|
Cable type |
3 core FEPDS cable |
|
| Conductor size |
2.5mm square |
|
| Core identification |
Brown - Live (L1)
Blue - Live or Neutral(L2 or N) supply dependant
Yellow/Green - Earth (E)
|
|
| Connector Type |
3 way, Bayonet lock |
|
| Pin Identification |
Pin 'A' - Brown Wire (L1)
Pin 'B' - Blue Wire (L2 or N), supply dependant
Pin 'C' - Yellow/Green Wire
|
|
|
|
Cable Reels Specification
|
Dimensions: |
|
| Diameter |
372mm (14.6 inches) |
|
| Width |
255mm (10 inches) |
|
| |
| Weight: |
|
| Reel empty |
4.7kg (10.4 lb) |
|
| Reel with 250 ft Nom. cable assembly |
17.5kg (38.6 lb)
|
|
|
|
Sentry Box Specification
|
Dimensions (overall, inc. mounting brkt. and connectors): |
|
| Height |
115mm (4.5 inches) |
|
| Width |
244mm (9.6 inches) |
|
| Length |
340mm (13.4 inches) |
|
| |
| Weight |
12 lb (5.4kg) |
|
| |
| Electrical: |
|
| Reel empty |
4.7kg (10.4 lb) |
|
| Reel with 250 ft Nom. cable assembly |
17.5kg (38.6 lb)
|
|
| |
| Voltage Range: |
|
| Input Power Supply. |
208 to 240V Nominal, 50/60 Hz. Fused at 10 Amp
|
|
| Suitable Supply Configurations (Generator or Mains) |
Single Phase (L & N)
Split Phase (L1 & L2) Ctr. Gnd
120/208V (2 Legs + Gnd.)
Isolated Supplies.
|
|
| Output |
2 Stage: initially
30V nominal, then 208 to 240V if Ring Circuit is complete.
|
|
Field Circuit Protection Modes
(208 to 240V power is cut if any of
these faults are detected) |
Open Circuit,
Overcurrent, and
Earth Leakage
|
|
| |
| Status Indication: |
|
| Sentry Box Status |
Tri-colour LED
|
|
| Field circuit Status |
Tri-colour LED |
|
| Earth Leakage |
Tri-colour LED |
|
|
|
|
|
|
  |
